Whooz Calling is not communicating
Date Posted: 1/5/2012
If the Whooz Calling? unit is not communicating with your Crestron please check the following. First make sure that DIP switch #5 matches the baud rate that you have defined in your program. DIP #5 on = 9600 and #5 OFF = 1200 baud. Next ensure that you you have pins 2, 5, 7 and 8 pinned straight through from the Whooz Calling unit to Crestron and have hardware handshaking enabled on the COM port you are using in your program.
Reference Number: KB848644
Tags:
Caller ID,
TCI,
Whooz Calling